The console has a simple interface where you assign controls (buttons, sliders etc.) on the controller to options in the console:
- VFO selection,
- Audio level,
- Filter width.
When you configure an option of type Single the value used is that generated when the button is selected (pressed down).
When you configure an option of type Range (Audio level, Tuning) there are two value: minimum and maximum. As you slide or rotate the control the range is displayed.
You typically assign the large rotary controller (aka platter) to the frequency tuning. Some controllers send value 65 when rotated clockwise and 63 when rotated counter-clockwise. Others such as the Behringer CMD PL-1 DJ Controller send a value which indicates the direction and speed of rotation.
You can manually enter the recommended range of values:
- Tuning >> 65 to 126
- Tuning << 1 to 63
It is possible to write to some controllers, for example to set LED colour an intensity. At present this is not supported.